This is a build I have been working on in my spare time. Today I planned on fitting a trigger and a few parts. I wanted a solid medium length trigger with a smooth curved pad. I found the perfect on in my spare parts been...except it was to wide to long and to heavy. So after a little time I had what I wanted.
I de burred the frame rails where the trigger bow would ride but the trigger was still wide in the back. Rather then stoning it by hand I set it up and pulled a few thousandths off with the surface grinder.
It chattered a little but I didn't care because I knew I would be polishing it up anyways..
Once that was done and fit I shortend the pad .090 and put a .625 radius on the front with the mill.... no pics
Hand smoothed everything to the shape I wanted and shortened the over travel screw
I wanted to loose a little more weight so I lightened the trigger bow too
Fit in the build and it is just what I wanted.
Oh BTW, 10MM
Starting to take shape. I still have a lot to do but I am thinking this will look good in hard chrome when done.
I de burred the frame rails where the trigger bow would ride but the trigger was still wide in the back. Rather then stoning it by hand I set it up and pulled a few thousandths off with the surface grinder.
It chattered a little but I didn't care because I knew I would be polishing it up anyways..
Once that was done and fit I shortend the pad .090 and put a .625 radius on the front with the mill.... no pics
Hand smoothed everything to the shape I wanted and shortened the over travel screw
I wanted to loose a little more weight so I lightened the trigger bow too
Fit in the build and it is just what I wanted.
Oh BTW, 10MM
Starting to take shape. I still have a lot to do but I am thinking this will look good in hard chrome when done.