Taken by jj...
This was the top half of a bunk bed set. It is solid and decent looking. Pine frame w/ 13 oak slats (which are screwed onto the frame)....takes standard 74" x 39" mattress, etc.
There is a good size chip out of the edge of one horizontal rail (below slats) that is cosmetic only, and will be covered by the bedding. Couple other small dents, but nothing major by any means.
This is put together w/ hex (allen) screws (many of them) and would be best hauled fully assembled, if you have a pick-up truck. The 27" height will easily go thru most doorways.
PM with any questions.
FREE, and must be picked up ...N.W. side of Indy.
The places shown in pics #3 & 4 are 'cosmetic'. The top post could use some TLC...
Thanks for looking!
This was the top half of a bunk bed set. It is solid and decent looking. Pine frame w/ 13 oak slats (which are screwed onto the frame)....takes standard 74" x 39" mattress, etc.
There is a good size chip out of the edge of one horizontal rail (below slats) that is cosmetic only, and will be covered by the bedding. Couple other small dents, but nothing major by any means.
This is put together w/ hex (allen) screws (many of them) and would be best hauled fully assembled, if you have a pick-up truck. The 27" height will easily go thru most doorways.
PM with any questions.
FREE, and must be picked up ...N.W. side of Indy.
The places shown in pics #3 & 4 are 'cosmetic'. The top post could use some TLC...
Thanks for looking!
Last edited: