I have for sale my 100% unused and unfired BY ME same as new in box AR-15 upper assembly WITH NO BCG OR CH.
The upper assembly specifications are:
>Upper Receiver:
Mas defence Forged to Mil-specs upper receiver with forward assist
>Barrel:
Ballistic Advantage M4 profile 16" 556/223 1x7 rate of twist
4150V MELONITE coated inside and out carbine length gas system M4 Dual feed ramps
Per Mas Defence Their Ballistic Advantage barrels are guaranteed to give MOA 100 yard accuracy.
From Mas Defence on Ballistic Advantage barrels:
Guaranteed to Perform - Directly from Ballistic Advantage's Website
15" long black anodised Areo Precision AR-15 Enhanced M-Lock handguard Gen 2
>Gas Block:
.750 low profile gas tube stainless steel. Gas block and gas tube Melonite coated
>Muzzle Device:
A2 flash hider
Link to this exact upper assembly I have for sale:
>Additional information from the Mas defence web site:
16" 5.56 / .223 BARRELED UPPER - AERO PRECISION ENHANCED M-LOK 15" GEN 2
1. Upper Receiver - 7075 T6 Aluminum A4. Precision Machined to Mil-Spec Tolerances. Black Hardcoat Anodized Mil-Std-171 Type III. M4 Ramps, Forward Assist, Ejection Door.
2. Barrel - 16" 5.56 NATO / .223. See drop down for specifics.
3. Handguard - Aero Precision Enhanced M-LOK 15" Handguard GEN 2 - APRA100218AS
4. Gas Block - .750 Low Profile Steel Melonite Nitride Treated Gas Block
5. Gas Tube - Carbine Stainless Steel Gas Tube
6. Muzzle Device - A2 Half Cage
Just trying to brake even on my purchase. Was going to build a complete rifle but just stumbled across a Colt CR6920 EHPR for a shockingly affordable price and bought it. So this complete upper has to go to help fund the purchase. Comes with original recept, order information and spec sheet.
Did mate it to my Aero Lower and it fit perfectly with no issues.
Asking $450 and that is not including my S&H and taxes. PM me here if interested. I live in NW Indiana and will travel an hour or so for sale. Must show IN DL and LCC, will sell to IN residents only. Nothing recorded what so ever. Not interested in any trades at all.
Pictures:
The upper assembly specifications are:
>Upper Receiver:
Mas defence Forged to Mil-specs upper receiver with forward assist
>Barrel:
Ballistic Advantage M4 profile 16" 556/223 1x7 rate of twist
4150V MELONITE coated inside and out carbine length gas system M4 Dual feed ramps
Per Mas Defence Their Ballistic Advantage barrels are guaranteed to give MOA 100 yard accuracy.
From Mas Defence on Ballistic Advantage barrels:
Guaranteed to Perform - Directly from Ballistic Advantage's Website
- We stand behind our commitment to performance. All Ballistic Advantage barrels are guaranteed to give sub Minute of Angle (MOA) accuracy with match grade ammunition.
- We define sub MOA as a group size of 1 inch or under at 100 yards with a 3 shot magazine fed group, or 5 shot single loaded group.
15" long black anodised Areo Precision AR-15 Enhanced M-Lock handguard Gen 2
>Gas Block:
.750 low profile gas tube stainless steel. Gas block and gas tube Melonite coated
>Muzzle Device:
A2 flash hider
Link to this exact upper assembly I have for sale:
16'' 5.56 / .223 BARRELED UPPER - AERO PRECISION ENHANCED M-LOK 15'' GEN 2
16' 5.56 / .223 BARRELED UPPER - AERO PRECISION ENHANCED M-LOK 15' GEN 2
www.masdefense.com
>Additional information from the Mas defence web site:
16" 5.56 / .223 BARRELED UPPER - AERO PRECISION ENHANCED M-LOK 15" GEN 2
1. Upper Receiver - 7075 T6 Aluminum A4. Precision Machined to Mil-Spec Tolerances. Black Hardcoat Anodized Mil-Std-171 Type III. M4 Ramps, Forward Assist, Ejection Door.
2. Barrel - 16" 5.56 NATO / .223. See drop down for specifics.
3. Handguard - Aero Precision Enhanced M-LOK 15" Handguard GEN 2 - APRA100218AS
4. Gas Block - .750 Low Profile Steel Melonite Nitride Treated Gas Block
5. Gas Tube - Carbine Stainless Steel Gas Tube
6. Muzzle Device - A2 Half Cage
Just trying to brake even on my purchase. Was going to build a complete rifle but just stumbled across a Colt CR6920 EHPR for a shockingly affordable price and bought it. So this complete upper has to go to help fund the purchase. Comes with original recept, order information and spec sheet.
Did mate it to my Aero Lower and it fit perfectly with no issues.
Asking $450 and that is not including my S&H and taxes. PM me here if interested. I live in NW Indiana and will travel an hour or so for sale. Must show IN DL and LCC, will sell to IN residents only. Nothing recorded what so ever. Not interested in any trades at all.
Pictures:
Attachments
-
Screenshot_20210524-132617_Gallery.jpg853.5 KB · Views: 19
-
20210524_131756.jpg1.7 MB · Views: 18
-
20210524_133108.jpg1.4 MB · Views: 15
-
20210524_140507.jpg1.7 MB · Views: 15
-
20210524_140640.jpg1.9 MB · Views: 14
-
20210524_140628.jpg1.5 MB · Views: 14
-
20210524_140623.jpg1.6 MB · Views: 15
-
20210524_140608.jpg1.7 MB · Views: 12
-
20210524_140603.jpg1.7 MB · Views: 10
-
20210524_140507 (1).jpg1.7 MB · Views: 14
Last edited: