Anyone here regularly carry a Buck 110/112? What are your opinions on it as a daily carry?
I do when I'm at home. Currently it's a Basspro Buck 110 with a CPM154 blade. Previously it was a standard 110 that had a BG-42 blade upgrade, but I retired that guy after a lot of use (the blade is noticeably smaller from sharpening). I also have a Cabela's Alaskan Guide Buck 110 with a CPM S30V blade.
You have my interest. I had only ever seen them with (I think) 450C.
Current Buck 110 and 112s are 420HC with a very good heat treatment by Paul Bos.
Before that, they were (in reverse order) 425M and 440C. You can find charts that will tell you what your knife steel is based on the marking near the pivot end of the blade.
You can get either 420HC or CPM S30V when you build a 110 using the custom shop web site. You can also get S30V if you get the Alaskan Guide version from Cabela's.
Won a 110 on a Ebay auction, has the nylon case, and it has been an EDC, especially during hunting season.
No issues with either, they are a knife, not a pry bar, or hammer, or screwdriver. They cut, and are good at it.