Yeah, they're huge!Thoughts on these hard drives?
It's been a while since I bought a hard drive.
And if you do a RAID array, it's probably good to buy an extra as a spare.
Yeah, they're huge!Thoughts on these hard drives?
Several years ago seagate let a huge batch of flawed drives out that caused a lot of problems for me
But on a personal level Seagate has a been a solid work horse for me for years. Weatern digital onced burned me hard on a warranty issue which caused me to lose nearly 300G worth of media.
Professionally in recent years I've seen the typical 5years worth of solid performance from Seagate.
So aside from their oopsie several years ago. My money goes to them first and wd can eat a bag of ..youknowwhat
Biggest issue right now is PMR vs SMR disks and not all the manufacturers are clear about what disk you're getting. And knowing what flavor of advanced format your equipment will support. 512e works with most things but there is a lot of 4kn stuff coming out that won't work on older hardware.
I have a fair number of WD drives, (Green, Black, Red) with between 2 - 4 years on them. Had some seagates from years ago that failed and were replaced under warranty only to have the replacements fail as well within a year. Just assume they are all equally probable to fail. That is why you add them to a RAID array. Warranty is mostly irrelevant to me as most give you a "refurbished" replacement and my track record with those is very bad.
How did they burn you on warranty?
Had a disk go bad. I contacted support. They ignored me. I contacted support again. Was ignored again.
Contacted again. They replied and asked me a couple questions. I sent back the answers. They then told me the warranty had expired and there was nothing they could do for me. The warranty ended the day after they sent their questions.
Despite the fact I had proof I had contacted support well with in the warranty window they told me I could purchase support if I wanted help.
Wd will never get another dollar from me.
Only oncan I hop from a reloading thread to a NAS thread
...
Question Ingo IT genius'... I have a old Iomega Storcenter IX2-200 NAS 4x1T RAID and now have a drive failing... Can I install a larger than 1T drive say 2T and have the array rebuild ok since they are not matched drives?
Thanks.
Not sure about your device, but when setting up a raid, it's always to the lowest common denominator...so if you have three 1TB and you stick a 2TB hdd in there to replace the one bad 1TB drive, you will only use 1TB of the new hdd.
Only oncan I hop from a reloading thread to a NAS thread
...
Question Ingo IT genius'... I have a old Iomega Storcenter IX2-200 NAS 4x1T RAID and now have a drive failing... Can I install a larger than 1T drive say 2T and have the array rebuild ok since they are not matched drives?
Thanks.
Those days are mostly gone, replaced by the likes of cloud storage. It of course has its own problems but usually doesn't involve dying hardware and lost data.I am so thankful to God Allmighty that I am past this phase of my career. I come from the days of the ST-251 (the one that if you hit it just right it would start working again), the era when Dell's Array Controller would initialize the entire RAID Array if you had to change the ROM battery. I don't envy you guys one bit, and I don't miss those 3am con calls explaining to the VP that it's gone, all of it, and we're not sure if the backup has all of the month end data.
This.
Also, Ive been doing this 25 years. If I am RAIDing, (always) I just buy the cheapest 5400 I can at the correct capacity. Odds are its going to run as long as the newer specialty drives. And if the gamble doesnt pay off, my data is still safe.
Interesting take, I'll have to see what they have available in the 10tb and up group