Revolver Storage in a Gun Safe

[Aszerigan]

I'm looking for suggestions to store K/N frame revolvers upright in a gun safe. I have the taco holder style coated metal and the N-Frame revolvers are too large. I bought some slotted holders off Amazon, but they're not even wide enough for K frame cylinders.

How do you store your revolvers (out of box) in the safe without getting them scratched up. Points for pics.

 

[DoggyDaddy]

I don't know if this would work for N frames, but this is what I did for my K frames. Cut a section of pegboard with some furring strips on the back and fastened to the inside of the door. I used plasti-dipped hooks to prevent marring of the metal.

 

[OneBadV8]

I use something like this, but not the exact same thing.

https://www.basspro.com/shop/en/liberty-safe-under-shelf-handgun-hangers

 

[Aszerigan]

I use something like this, but not the exact same thing.

https://www.basspro.com/shop/en/liberty-safe-under-shelf-handgun-hangers

I was looking at those but with 8" barrels, they'd be hanging halfway out of the safe. :-)

 

[drillsgt]

I'm looking for suggestions to store K/N frame revolvers upright in a gun safe. I have the taco holder style coated metal and the N-Frame revolvers are too large. I bought some slotted holders off Amazon, but they're not even wide enough for K frame cylinders.

How do you store your revolvers (out of box) in the safe without getting them scratched up. Points for pics.

My N frames seem to fit okay in my holders wire holders?

 

[Creedmoor]

I was looking at those but with 8" barrels, they'd be hanging halfway out of the safe. :-)

Do they not have Magnum size anymore?

 

[Creedmoor]

Andy, ive always used the soft cheap zippered foam lined handgun cases.
I just stack them up on a shelf in a vault.

 

[OneBadV8]

I was looking at those but with 8" barrels, they'd be hanging halfway out of the safe. :-)

They do make longer ones. Could probably hand roll your own too

 

[MindfulMan]

I use one of these stiff-foam holders. I only have one N-frame (8" barrel), but the barrel hangs out the back, and the cylinder fits, as the the dividers are flexible enough to accomodate.

Available on Midway USA : https://www.midwayusa.com/product/1018149593?pid=537283

 

[gmcttr]

I use a veriety of cases similar to these...

MidwayUSA Range Bag Pistol Case Coyote

Protect your firearm with the MidwayUSA Range Bag Pistol Case. Measuring 13.5" x 10", this case fits a variety of handguns. Constructed of...

www.midwayusa.com

MidwayUSA Silicone-Treated Sherpa-Lined Pistol Sock Dark Gray 13

The MidwayUSA Silicone-Treated Pistol Gun Case is a great way to store and transport your pistol. This soft pistol case takes up less room than a hard...

www.midwayusa.com

 

[possum_128]

 

[Aszerigan]

I use one of these stiff-foam holders. I only have one N-frame (8" barrel), but the barrel hangs out the back, and the cylinder fits, as the the dividers are flexible enough to accomodate.

Available on Midway USA : https://www.midwayusa.com/product/1018149593?pid=537283



View attachment 305864

These are the ones I bought buy they're too slim for the K frames. I was hoping they'd work. May just use them for the semi autos.

 

[MindfulMan]

These are the ones I bought buy they're too slim for the K frames. I was hoping they'd work. May just use them for the semi autos.

Admittedly, I keep a mix of revolvers/semis in the holder.

 

[NyleRN]

I have these Hyskore organizers. Have a couple L frames in there. They seem to do a good job. Had an 6" 686 that the butt hung off the end cause the barrel hit the back of the safe

 

[Fiddle]

+1 for Hyskore
I use it for revolvers including a snubby which I cut the Hyskore down to fit.

 

[MrSmitty]

I need more guns........

 

[mark40sw]

I use gun socks from midway. They like being in their little sleeping bags.

 

[Leadeye]

Zippered cases like Creedmoor suggested, I put white tape on the outside with a description of what's inside.

 

[STFU]

You could try one of these:

Pistol Peg Rack for Gun Storage | SecureIt Gun Storage

The SecureIt® Pistol Peg Rack allows for high-density gun storage of 11 handguns, 9mm or larger, in most SecureIt® gun storage systems.

www.secureitgunstorage.com

or the single style (but these will get cost prohibitive if you need more than a few):

Single Pistol Peg

Organize your pistols using the SecureIt Single Pistol Peg. Sitting perpendicular to the wall, the Single Pistol Peg creates more space to hold your guns, ammo, and gear.

www.secureitgunstorage.com

 

[Kirk Freeman]

I hang them on the doors of the safes with plastic hooks.

Heirloom guns (stuff from family) get gun socks on their own shelf.