The slide on my P95 is stuck. It's it's 2/3 of the way racked back. My son was reassembling the gun, pulled the slide to do function test and the gun locked in place. I already lowered the extractor but that doesn't do anything. Gun isn't seized up, it rattles a little. It's just mechanically locked. I noticed the barrel is slightly behind the guide rod. I suspect my son missed the barrel link when he inserted the pin. There's no way to remove the take down lever because it's pressed against the slide and I can't push the slide forward to the notch that would normally allow me to remove it. I tried lightly tap on the back of the slide with the rubber mallet, no luck. I thought about taking a Dremel and carefully cutting off the takedown lever but I can't find any replacements available online.