Edged Tools

Search results

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!

    • Register Log in
    1. PriestEG

      black growths in neck of deer

      Depending on how many and their anatomical location, my guess would be parathyroid glands
    2. PriestEG

      Where are the ducks?

      Hunted Fri/Sat/Sun this past weekend on Lake Barbee in North Webster IN, last weekend of North Zone. Ducks were moving real good up there, tho not the numbers we had weeks ago. Managed to bust 2 mallards, a goose, and a scalp. Woodies have long disappeared. Wigeons were abundant, but flew high...
    3. PriestEG

      9mm build, swap .450B upper?

      Awesome, great advice Kruiser!! So for the buffer, would a standard buffer work for the .450B and a heavier buffer for the 9mm then? or do i have that backwards.. I know that 9mm carbines are recoil operated vs. the DI gas system of the tradition platform, so how does that play into weight...
    4. PriestEG

      9mm build, swap .450B upper?

      So I have another Spikes stripped lower in my possession and plan on building an 9mm carbine out of it with the correct 9mm parts (buffer, hammer, mag block etc). My questions becomes this, if I build a AR 9mm carbine with the parts it requires, would I be able to simply swap out the upper to a...
    5. PriestEG

      What HAVE you carried?

      -(M249 with saw 2yrs, M240G 2yrs, M4 w/ 203 for a year) with M9 as primary side arm -M79 for 8 months counts as a side arm IMO since it was not my main rifle carried -Beretta 92fs for 3 years -Glock 17 for 2 years -S&W J frame 6 years
    6. PriestEG

      The Lockdown thread.

      As a Marian University student, I can confirm that the university campus has been locked down on two separate occasions for nearby incidents. 1. the shooting at the Lafayette Square mall a while back and the second was recently when a MWAG was at a gas station filling up his truck about a mile...
    7. PriestEG

      Custom firearm refinishing pic thread.Duracoat, Ceracoat, Guncoat... Gunsmithing

      good looking work. im assuming you used a small air brush type painter right?
    8. PriestEG

      Deer hunting equipment 2013

      I need to get a set up like yours. hunting of the back deck, not missing a beat! I like your style for sure
    9. PriestEG

      Bow purchase advice

      As mentioned before, buy a decent used bow if possible. 3 years ago, I purchased a used High Country Archery Sky Force X1 for $50 from a friend who 'needed' a new bow. I took that used bow to the outdoorsman and for less than $175 (new string, cobra 3 pin sight, dozen arrows) I was in good...
    10. PriestEG

      Get Your Ammo Here!

      camby walmart had ~25boxes of Remington Golden Bullet 22lr 225ct boxes and lots of independence .223. this was about 25 minutes ago
    11. PriestEG

      Round in Chamber

      do not be intimidating by the location of a round in the chamber.. its not a snake that is ready to 'bit' at a seconds notice. its just a tool. be confident
    12. PriestEG

      In the running for "stupid story of the year..."

      Thats about as stupid as what I was told Marian University by the campus police when I was told that I could be expelled if I carried my empty holster on campus in show of support for my 2A rights..
    13. PriestEG

      50 BMG through 1 1/2" steel plate... Will it penetrate?

      good stuff. in your initial post you said this was 1.5" thick. was than an estimate or measurement? . was this a factory loaded round?
    14. PriestEG

      50 BMG through 1 1/2" steel plate... Will it penetrate?

      so depending on the type of steel you have, which im assuming is just a heavy plate steel not armor plate or face hardened, then i believe it will penetrate. i have fired thousand of rounds of 50bmg while in the USMC as a machine gunner and never ceased to amaze me at would that big round would...
    15. PriestEG

      50 BMG through 1 1/2" steel plate... Will it penetrate?

      THIS.. you could have a mild, thick steel and it would penetrate similar to a thin, harder steel. another thing to consider when discussing penetration is the angle.. the general stuff aside, i got out my USMC Machine Gun Leaders Course book and referenced some date which is where the following...
    16. PriestEG

      WTT: Looking for CCI mini mags, have bulk 22lr in trade

      Howdy, I purchased a Walther P22 Target model and want to pick up a few 100rd packs of CCi mini mags to run thru and check the function of the pistol. I have a 30 day warranty on the firearm and need some of the ammo that the P22 is know to like in order to test it. If you have some you could...
    17. PriestEG

      Deep cycle battery questions

      So I got a aluminum fishing boat and a bow mount trolling motor, powered by a new Interstate 27 group battery Model #SRM-27. Now im trying to figure out which charger to go with. On interstates website it says to use no more than a 20amp charger. Question 1- would a minn kota digital on board...
    18. PriestEG

      What have you done this week to prep?

      today i butchered my spring batch of chickens and got my summer batched out to their tractor and read to grow big.
    19. PriestEG

      Baitcasting Tips for a Newbie?

      i bought this 3 months ago to try the baitcaster and i have been very happy with it thus far!
    20. PriestEG

      Who's ready to go fishing???

      im getting out tomorrow for the 4th time since ice fishing season. been kind of a weird season for me so far, rained each time i have tried to get out and no luck. last weekend i found a sweet lil spot that i hauled 6 larges out of in about 40 minutes on a wacky rigged senko. cant wait til the...
    Top Bottom