Well, don't usually loan him anything.
He doesn't usually do anything.
Ha.......
Well, don't usually loan him anything.
He doesn't usually do anything.
So I finally had time to look into the issues with the JD. The most pressing one was it not shifting out of gear. Not sure how the newer JD riders are, but mine won't start in gear.
My dad and I took off the rear part of the body and immediately noticed the vent hose for the fuel tank was rotten and had fallen off. I took off the vent hose connector and made sure it wasn't clogged. We removed the fuel tank from the mower and upon manipulating the gear shift lever, my dad noticed the linkage between the lever and the transmission was catching on other parts. So we tightened up the bolt and voilà, the mower shifts into all the gears and back to neutral. So what I was thinking was going to be a several hundred dollar transmission fix turned out to be a loose bolt.
As far as the mower quitting after a relatively short time of use, I wasn't able to diagnose due to the weather keeping me from mowing and seeing if it still happens. I checked the vent hole in the gas cap and it didn't appear to be clogged. Well see how it goes when I'm able to run it properly.
I appreciate everyone's suggestions and checking in to see if it had been fixed.
I know, right. The 28 year old mower will live another year.
well ****, I wanted to watch you blow the son of a ***** up.
Flying, flaming, fiery, green poo.
Blame my dad.
Nope, and I ain't talkin' bad 'bout your mama or your wife neither.
You're bigger, younger, faster, stronger, and all badged up. I bow to my betters buddy.
quick thought, I had a buddy with a simplicity that did the same thing, I helped him and we replaced almost the whole fuel system just to find out that the underbelly was so packed with old grass the motor couldnt cool itself, spent a good hour clearing all ventilation to the mower and it runs great again
Sometimes that packed grass can do serious stuff.
Which is why they recommend cleaning it out.
Well Frank, sorry it isn't working yet.
Sidenote: I finally cut my grass for the first time Friday. Man did I luck out.
While cutting the grass at the entrance to the subdivision, first, I ran over a rope. One of those that you use for tug of war with your dog. Thick, and has knots tied in it.
Fortunately, I killed the mower fast.
Unfortunately, the rope got caught between the blade and the mower deck. I spent probably 15 minutes worrying that thing out.
I finally found another rope I could put around the blade to help me turn it a bit.
Mower worked, I was worried.
2nd, driving back to my house, there's a high pitched squeal. Sounds like a bearing going out.
Squeal happens even when stopped.
Finally pulled over shut down mower.
Found small branch/stick stuck between power take off and the belt.
Once I pulled it out, I was good to go.
I was just thinking of this thread, so each time I was worried.
First time cutting the grass this year??? Was it 3' tall?
Mine in the back yard, and at the front of the subdivision was high enough to hide hazards, such as the rope.
My front yard wasn't too bad.
I was holding off because of the rain.
I ended up sinking, almost getting stuck at the front of the subdivision. It was still swampy.
Yeah mine was pretty tall but not tall enough to hide much more than small branches. It was really soupy in spots still.
it could be some trash in the carb. I would clean it thoroughly. Open it up and anything that can be removed then take it out and clean it and put it back together. Check all diaphragms for tears. Use compressed air for parts and places that can take it without breaking. Was the fuel filter full of debris, or did it look okay? If there was any debris then the tank may need to be cleaned.
Chances are the carb will not gravity feed from the tank, due to the tank being lower than the carb. I would start by cleaning the carb and check the movement on the shut-off solenoid, on the bottom of the bowl. If that solenoid is getting weak, it could be shutting the fuel off or reducing the flow. If you need a hand, PM me and we can meet up.
I'd try removing the rest of it, but before you do I would clean the outside of it otherwise when you go to remove it there could be debris that falls into it from the outside, then you would need to remove what was already inside plus what just fell into it.We pulled the bowl off the carb but didn't remove the entire carb from the mower. The bowl was spotless but of course that doesn't mean the carb isn't gummed up. When I replaced the fuel filter I didn't notice any big chunks.