might as well upgrade to a 1050 w/ auto drive.
Ponsness Warrens Autodrive running a Dillon Super 1050, with a bullet feeder - YouTube
No, I'd have to unbolt and sell have the crap I own for reloading.
might as well upgrade to a 1050 w/ auto drive.
Ponsness Warrens Autodrive running a Dillon Super 1050, with a bullet feeder - YouTube
Thanks for the reply. Based on all the reading I have been doing, some have said the 650 may not be the best choice for someone new to reloading and the 550 is better start with due to its simplicity. While I can see how starting with a 550 makes sense, I just feel certain 6 months down the road I would want to upgrade to a 650 and regret the cash I layed out for the 550. I don't know, I cannot decide what I want to do.
I was torn between the 550 and 650. The 550 is a little cheaper and faster to change over (switch calibers). The 650 really cranks out the ammo and I like the powder alarm and auto index that reduces my chances of a double charge. I don't think you will seriously regret either one because they are both fine pieces of equipment. I started with a 650 and had no issues.
Eventually you might find yourself looking for a single stage as well. People use them for small runs while developing a load, to deprime offline before wet tumbling and other uses. The single stage are cheap and handy to have around.
If you aren't sure you want to reload buy a single stage (e.g. Rockchucker) and try it out. You will still find uses for it after you upgrade to a 550/650. If you are sure you want to reload then don't worry about starting on a 550 or 650, it isn't that tough.
Let me sum it up for you: don't get the SDB and make sure your new press is blue.